There’s a new filament brand in town: Refil. Their filaments are made from recycled plastics. At the moment they offer black ABS (from recycled car dashboards) and PET (from recycled drinks bottles), with more colors and materials to follow soon. When we attended a presentation by one of the founders, he gave us samples of both filament types and we were eager to see if this stuff was any good.
One of the main problems in any recycling project is that the source material is usually full of contaminants, additives and impurities. Refil appears to have solved this problem, using a combination of pickiness (only using RoHS/REACH-compliant source materials) and technology (working with industry partners from the recycling and processing areas). The result are filaments that look very good “on the roll”, indistinguishable from virgin material. Because the filament is made on very high-quality, industrial extruders, filament roundness and diameter is as constant as that of any other commercially produced filament. In keeping with the recycling philosophy, the spools are made of recycled cardboard, which is a nice touch.
High-Impact PolyStyrene (HIPS) is one of the less known 3d-printing materials. Most people that have heard of it know it as a dissolvable support material used in combination with ABS, because it dissolves in d-limonene (and ABS does not). It is not frequently used as a printing material in itself.
The guys from Form Futura want to change that because they believe that HIPS could be a very nice primary printing material. They are bringing out a line of HIPS filaments in 1.75mm and 2.85 mm diameters, at the moment only in white but black, red and gray are planned. They asked us to test a spool of their 2.85mm white HIPS and see how it compares to ABS and PLA. We wanted to look at a number of characteristics: extruder temperature, print bed, warping, quality and ‘smoothability’ (i.e., can HIPS be vapor-smoothed like ABS with Acetone).
For PLA, however, acetone smoothing does not work. This is a pity, since PLA is much easier to work with than ABS. We found some solutions for smoothing PLA, but most involve rather dangerous-sounding chemicals such as Tetrahydrofuran and Dichloromethane. The one exception we found is Ethyl Acetate which seems to give good results and is (relatively) safe. This was something we wanted to try for ourselves.
We recently got our hands on some flexible filament samples, kindly provided to us by the guys at FormFutura. One commonly encountered problem with these filaments is their tendency to bend, buckle and loop between the extruder’s hobbed bolt and the top of the hotend. Enter the FlexyStruder, an extruder made by LulzBot to deal specifically with flexible filaments.
One of the more interesting new filament types that have come out in the recent months is FlexiFil, a Thermoplastic Co-Polyester sold by FormFutura. They were kind enough to provide us with a sample so we could try it out on our Prusa i3.
Aliens printed in green ABS and smoothed with the acetone vapor bath treatment. Spaceship printed in silver ABS, in two halfs. Not treated yet. The background is just a picture that we printed in a paper to take the photo since our photoshop skills are not that good. But overall it looks pretty good, don’t you think?
Last weekend we were at the 3D Print Experience show in Haarlem. Not as visitors, but with our very own stand! Most of the other exhibitors were businesses, but the organizers were kind enough to give us the opportunity to show the general public the hobbyist side of 3d printing.
After we set up our Etsy Shop and had a few orders, somebody came out with a custom order a bit challenging for us. He wanted some markers for a card game (like Magic) and he loved our purple tentacle so he asked if we could print 15 mini purple tentacles.
The purple tentacle model is about 7cm tall and the base is 5cm diameter and that’s too big for a card marker so he asked if we could do it about 1-2 cm base diameter. We were worried that with that much down-scaling we will lose too many details, so we decided to experiment on ways to do it just to see if it was even doable. Continue reading →
Some time ago we heard about a research project for a 3d printed house. Later on, we discovered that it is being developed in Amsterdam by DUS Architects and pretty close to us so we decided to go for a visit today.